Insulating Joints PN40-100 bar

mij monolithic insulating joints ansi 600

Insulating joints PN40-100 bar

For mainline sectioning

Usually ready in stock from DN 3/4“ to DN 12", the insulating joints for mainline Pn 40-10 are normally produced in diameters from 3/4“ to 56" with bevelled ends and/or flanged.

On request FAP is able to produce insulating joints up to 82“ diameter, operating pressure up to 250 bar / 25 Mpa, operating temperature up to 200°C / 392°F.

Technical specifications

  • Manufatured and tested: UNI-CIG 10285
  • Max operating pressure: 100 bar / 10 Mpa
  • Test pressure: 150 bar / 15 Mpa
  • Max operating temperature: 70°C / 158°F
  • Electrical resistance in air t 1000V d.c.: > 5Mohm
  • Dielectric test: 3000 V


  • Pipe pups: steel UNI 7088/API 5L/ASTM/UNI
  • Main body: forged A105/equivalent/ASTM/UNI
  • Insulatings rings: G10/G11
  • Gaskets: NBR/VITON
  • Ends: bevelled API 5L and/or flanged
  • Coatings: epoxy resins certificated for drinkable water according to DM 174

The PN40-100 Insulating Joints Range

* Dimensions in mm are for information only and may change.

disegno pn25
tabella PN40 100

We Offer: Consultation, Projecting, Installation, Maintenance and Worldwide Cathodic Protection Material Shipping.