Insulating joints PN16-25 bar
For mainline sectioning
Usually ready in stock from DN 3/4“ to DN 16", the insulating joints for mainline Pn 16-25 are normally produced in diameters from 3/4“ to 56" with bevelled ends and/or flanged.
On request FAP is able to produce insulating joints up to 82“ diameter, operating pressure up to 250 bar / 25 Mpa, operating temperature up to 200°C / 392°F.
Technical specifications
- Manufatured and tested: UNI-CIG 10285
- Max operating pressure: 25 bar / 2,5 Mpa
- Test pressure: 38 bar / 3,8 Mpa
- Max operating temperature: 70°C / 158°F
- Electrical resistance in air at 1000V d.c.: > 5Mohm
- Dielectric test: 3000 V
Materials
- Pipe pups: steel UNI 7088/API 5L/ASTM/UNI
- Main body: forged A105/equivalent/ASTM/UNI
- Insulating rings: polycarbonate/G10/G11
- Gaskets: NBR/VITON
- Ends: bevelled API 5L and/or flanged
- Coatings: epoxy resisns certificated for drikable water according to DM 174
The PN16-25 Insulating Joints Range
* Dimensions in mm are for information only and may change.
Certifikat
